ELATE is stoked to be able to present to you our first intercooled supercharger manifold designed to suit the popular BMW M60/M65 V8.
The manifold features our unique 2 piece design machined from billet 6061 aluminium, media blasted and anodised for aesthetics and corrosion resistance. The upper and lower halves are held together using 4 x zinc plated countersunk fasteners and sealed using an EPDM cord to make sure boost pressure stays where it needs to.
All manifolds ship with your choice of 10mm aluminium top plate however if something custom is needed just drop us an email to see if we are able to assist.
This manifold can accept factory injectors however the fuel rails will need t be replaced with aftermarket ones.We recommended that injectors are upgraded along with the rest of your fuel system if you’re looking at running higher boost pressures.
**Note** SVT M112 superchargers also need the factory intercooler mount on the underside removed to allow it to mount to our top plates.
This kit includes the following items:
Billet 2-piece manifold.
Aluminium top plate to suit the charger of your choice.
12 x Zinc plated M8 x 25 countersunk fasteners (for the top plate and manifold body assembly).
10 x Zinc plated M8 x 55 cap screws (for attaching the manifold to the heads)
3mm EPDM cord (installed)
Email assistance if required.
Items included in kit:
ELATE X HARROP S/CHARGER PULLEY
BILLET THROTTLE BODY ADAPTER TO SUIT THE HARROP HTV1900/2300 CHARGER INTAKE TO 90MM THROTTLE BODY
ELATE M6X PERFORMANCE FUEL RAILS WITH -6AN FITTINGS FITTED TO THE MANIFOLD (PAIR)
1.0 X BOSCH 1200LPH W2A INTERCOOLER PUMP W/ EV1 PLUG AND PUMP MOUNT
1.0 X ELATE W2A COOLANT RESERVOIR W/ 15PSI RELIEF CAP
1.0 X UNIVERSAL HEAT EXCHANGER W/ AN12 FITTINGS
1.0 X AN12 W2A HOSE (PER METER)
1.0 X AN12 90° HOSE ENDS
1.0 X 90MM THROTTLE BODY – BLACK
If in stock lease allow up to 1 week from date of order until dispatch as these are assembled to order.