SERIALNINE ZERO Division CD-PRO Adapter System

SERIALNINE ZERO Division CD-PRO Adapter System

From: $2,495.00

SKU: S9Z-CDK Categories: , ,

Description

SERIALNINE ZERO Division CD-PRO Adapter System

This is the highest quality, most technically advanced Toyota JZ Engine to Nissan CD/JK Transmission adapter system on the market. Countless hours of research and development have gone into this system to offer you the most seamless OEM quality product also capable of handling rigorous racing environments. Whether you have a daily driven 400HP street car or an 800hp Drift car, the CD-PRO has options to meet your needs.

SERIALNINE uses high quality racing components from well known manufacturers such as TILTON, ARP, GOODRIDGE, ENERGY suspension and OEM NISSAN. This combined with their proprietary ZERO Division components guarantee you have the best possible final product and will have long lasting performance on the street or at the track.

CD-PRO Kit Includes:
1) CD-PRO Bellhousing with Tilton Hydraulic Release Bearing and Goodridge lines.
2) Chromoly Flywheel  ( Your choice of Single or Multi Plate version )
3) ARP hardware for Flywheel and Other hardware for the Bellhousing.
4) Pilot bearing and adapter.
5) New input shaft seal and bearing gasket

BELLHOUSING: The CD-PRO Bellhousing is a precision “nobake” casting made of A356-T6 heat treated aluminum, manufactured in a CANADIAN ISO 9001 certified facility.

It has been pre-assembled with a TILTON hydraulic release bearing (HRB) and GOODRIDGE lines at the factory. All bolts and fittings have been torqued and the hydraulics have been leak tested. The input shaft seal has also been installed. All ZERO Division parts are made in CANADA.

FLYWHEEL: The CD-PRO flywheel is a CAD designed, FEA tested, CNC machined 1 piece unit made of billet 4140 HTSR chromoly.  It is computer balanced and reliable with the ring gear machined into the unit itself. The flywheel can be resurfaced if need be.

SINGLE PLATE flywheel weight is 14 lbs and combined with a normal single plate clutch at around 15lbs the complete assembly is approx 29lbs. We chose this weight for the single plate as most will be street driven and we wanted to keep the transmission rattling to a minimum while still providing the driving enjoyment of a lightweight flywheel.

Any single plate 350Z/370Z/G35/G37 clutch can be used with the CD-PRO. Please use a GOOD QUALITY clutch, some brands we recommend are ACT/EXEDY/Clutch Masters. Single plate pressure plate bolts are included and should be torqued to 13 lb/ft (M12x1.25x12mm)

MULTI-PLATE flywheel weight is 13lbs and combined with the TILTON 7.25” racing clutch the final weights are 20.5lbs for the twin and 23lbs for the triple. These flywheels are designed with a low MOI (moment of inertia) for quick engine acceleration and high heat capacity to resist warping under grueling drifting environments where clutch kicks and general abuse are normal.

We have setup the HRB in the CD-PRO for TILTON twin cerametallic or triple metallic clutches, but most 7.25” racing clutches ranging from twin organic to quad carbon units will work with our MULTI plate flywheel.  The setup height is 34.8mm (1.37”) PLEASE check this dimension when using a NON TILTON clutch!! Different pistons are available for use with clutches with different setup heights.

507GARAGE & SERIALNINE ARE NOT RESPONSIBLE FOR CLUTCH INCOMPATIBILITY/MALFUNCTIONS ON NON TILTON CLUTCHES

SERIALNINE CD999 Technical Shifter Relocation System available at a discount when ordered with CD-PRO

To complete your setup, think of one or all of the following items:

SerialNine SK5 Shift Knobs
SerialNine SK-3 Shift Knobs
SerialNine – CD999 OEM Boot Adapter
SERIALNINE ZERO Division CD-PRO Adapter System
SerialNine DS-PRO Adapter 1310/1350 Flange Adapter for 1 Piece DS on Toyota/Lexus cars

Please specify with or without SERIALNINE CD999 along with flywheel type by using drop down menu